Philips DVD723 - Manual (Page 10)

10
English Connecting to an Audio System
1
You can also listen to the sound of audio CDs
and DVD video discs by connecting to an
optional stereo system.
2
Connect the Left and Right AUDIO OUT on the
DVD player to the Left and Right AUDIO IN on
the stereo system.
TO VIDEO IN
TO SCART IN
OR OR
AUDIO SYSTEM
TO AUDIO IN
COAXIAL OPTICAL
DIGITAL AUDIO OUT
PCM/ MPEG2/
Dolby Digital
SUB WF
VIDEO OUT
(CVBS) AUDIO OUT
S-VIDEO
OUT
L R
1
2
TV OUT
Connecting to Optional
Equipment
● A digital component with a built-in MPEG 2 or
Dolby Digital™ decoder allows you to enjoy the
surround sound while producing the effect of
being in a movie theater or a concert hall.
● The player outputs the surround sound signals
from the DIGITAL OUT COAXIAL or
OPTICAL connectors.
If your receiver has a MPEG 2 or Dolby
Digital™ decoder,
1
Connect the COAXIAL or OPTICAL DIGITAL
AUDIO OUT of the DVD player to the
COAXIAL or OPTICAL DIGITAL AUDIO IN on
your receiver.
2
You will need to set the DVD player’s digital
output to ALL (see ‘Personal Preferences’).
COAXIAL OPTICAL
DIGITAL AUDIO OUT
PCM/ MPEG2/
Dolby Digital
SUB WF
VIDEO OUT
(CVBS) AUDIO OUT
S-VIDEO
OUT
L R
1
2
TV OUT
TO VIDEO IN TO SCART IN OR
OR
REAR
SPEAKERS
REAR
SPEAKERS
TO COAXIAL IN
RECEIVER with
MPEG 2 or Dolby
Digital™ decoder
H I G H P OW E R S U B WO O F E R
SU BW OOFER LEVEL CONT ROL STANDBY ON
CUT OFF FREQUENCY 60Hz 150Hz
MIN MAX
TO Sub-
woofer IN
Active
Subwoofer
OR TO OPTICAL IN
If you connect to an active subwoofer,
1
Connect the SUBWOOFER AUDIO OUT on
the DVD player to an optional active subwoofer.
2
The subwoofer reproduces just the low bass
sound effect (e.g. explosions, the rumble of
spaceships, etc.).
3
Be sure to follow the instructions supplied with
the subwoofer.
Notes:
– If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
– To see the selected audio format of the
current DVD in the Status Window, press SYSTEM
MENU.
– MP3 Audio is not available on the Digital
Output.
Preparation