Philips VOIP 080 - Manual (Page 8)

USING YOUR TELEPHONE
TO PUT ON HOLD OR TRANSFER AN EXTERNAL CALL
During an external call:
If you have no additional handset, when you press the call is put on hold with music.
Press Caller on hold Call resumed
listening to music
If you have several handsets registered to the same base station, when you press you can
transfer the external call to another handset:
On handset n° 1* All the other On another handset
handsets ring ** take the call or hang up
* Your correspondent can hear the music.
** If there is no reply, you can press
again to return to the external call.
To make an internal call, press , pick up from another receiver or hang up with .
TO PROGRAMME A NUMBER IN THE MEMORY
You can programme 10 telephone numbers in the memory. Using this function, you can dial the
numbers you call regularly automatically.
* This digit corresponds to the number of the memory chosen.
If your handset does not emit the two confirmation "beeps", repeat the whole programming
operation.
TO CALL A NUMBER FROM THE MEMORY
7
р р
р р
select a digit*
from
ð “Beeps” ð
Dial the
number to
be
programmed
ð
Confirm
to
Programming Memory
р р р The number is
dialled
Digit associated with the
number you want to dial
to
Connect the line Memory
р р
ang6523.qxd 31/05/99 15:20 Page 7