Philips KBD-SFTCFG - Manual (Page 10)

10
• Configure COM Port... – invokes a dialog for selecting a
PC COM port that will be used to communicate with an
IntuiKey keyboard. Selections are limited to COM1 through
COM16.
Toolbar button:
9.5 Server Menu
• Set Allegiant Server Document Association... (either the
Allegiant LTC 8059/00 Master Control Software for
Windows
® or the LTC 8850/00 Allegiant GUI software
must be installed on the PC for this option to be enabled) –
opens a dialog which allows an Allegiant server (.alg)
pathname to be stored in conjunction with the currently
active IntuiKey Configuration (.int) file.
Toolbar button:
• Launch Allegiant Server (either the Allegiant LTC 8059/00
Master Control Software for Windows ® or the
LTC 8850/00 Allegiant GUI software must be installed on
the PC for this option to be enabled) – launches the
Allegiant server (.alg) file specified in the Server | Set
Allegiant Server Document Association... option.
Toolbar button:
If the .alg file is available, the Philips GUI Allegiant Server dialog
will appear. If intending to make changes to the .alg file’s
Command Script macros, a user must log in with an installer
level profile. The default installer profile has the user name
Installer and password 1. Refer to the Allegiant server software
manual for additional information.
9.6 Window Menu
• Cascade – arranges multiple .int files in an overlapped fashion.
• Tile – arranges multiple .int files in a nonoverlapping
fashion. Some overlap may occur if the main window is too
small for a completely nonoverlapped display.
• Arrange Icons – arranges minimized (iconified) .int files in a
nonoverlapping fashion.
9.7 Help Menu
• About... – displays version/copyright information for the
KBD-SFTCFG.