Philips DVD Micro Theatre MCD718 - Manual (Page 11)

11
English
IMPORTANT!
– The type plate is located at the
bottom of the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
– Never make or change any
connections with the power switched on.
Step 1: Placing the speakers
and subwoofer
Front
speaker
( left )
Front
speaker
( right )
VIEWING AREA
Subwoofer
Connections
Speaker
(right)
Speaker
(left)
FM antenna
AM antenna
AC power
1
Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
2
Place the subwoofer on the floor near the TV.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD
System.
pg 001-041_MCD718_37 2006.4.13, 17:52 11