beautypg.com

Setting the menu language 39, Switching the assist subtitle on or, Setting the angle icon display 39 – Pioneer Super Tuner III D AVH-P4050DVD User Manual

Page 39: Setting the aspect ratio 39, Operating this unit, Setting the menu language, Switching the assist subtitle on or off, Setting the angle icon display, Setting the aspect ratio

background image

Notes

! If the selected language is not recorded on

the disc, the language specified on the disc is
outputted.

! You can also switch the audio language by

touching

AUDIO during playback. (Refer to

Changing audio language during playback
(Multi-audio) on page 25.)

! Even if you use AUDIO during playback to

switch the audio language, this does not af-
fect the settings here.

Setting the menu language

You can set the preferred language for dis-
plays of menus recorded on a disc.

1

Touch MENU LANGUAGE on the DVD

setup menu.
A menu language menu is displayed.

2

Touch the desired language.

The menu language is set.

# To switch to the second language select
menu, touch

NEXT.

# To return to the first language select menu,
touch

PREV.

# If you have selected OTHERS, refer to When
you select

OTHERS on the previous page.

Note

If the selected language is not recorded on the
disc, the language specified on the disc is dis-
played.

Switching the assist subtitle on
or off

If assist subtitles are recorded on a DVD disc,
you can display them by turning the assist
subtitle function on.
You can turn assist subtitles on or off as de-
sired.

% Touch ASSIST SUBTITLE on the DVD
setup menu to turn assist subtitles on.

# To turn the assist subtitle off, touch
ASSIST SUBTITLE again.

Setting the angle icon display

You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
! Initially, this function is set to on.

% Touch MULTI ANGLE on the DVD setup
menu to turn angle icon display on.

# To turn the angle icon display off, touch
MULTI ANGLE again.

Setting the aspect ratio

There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display connected to

REAR MONITOR

OUTPUT.
! When using a regular display, select either

LETTER BOX or PAN SCAN. Selecting
16 : 9 may result in an unnatural picture.

! If you select the TV aspect, the unit’s dis-

play changes to the same setting.

% Touch TV ASPECT on the DVD setup
menu to select the TV aspect.
Touch

TV ASPECT repeatedly until the desired

TV aspect appears in the display.

! 16 : 9 – Wide screen picture (16:9) is dis-

played as it is (initial setting)

! LETTER BOX – The picture is the shape of a

letterbox with black bands at the top and
bottom of the screen

! PAN SCAN – The picture is cut short at the

right and left of the screen

Operating this unit

En

39

Section

03

Operating

this

unit