Pioneer Super Tuner III D AVH-P4050DVD - Manual (Page 17)

Selecting a source
You can select a source you want to listen to.
To switch to the DVD player, load a disc in the
unit. To switch to the iPod or USB, connect an
iPod or USB portable audio player/USB mem-
ory to this unit.
% When using the touch panel keys,
touch the source icon and then touch the
desired source name.
The source names are displayed and select-
able ones are highlighted.
! DVD – Built-in DVD player
! RADIO – Radio
! iPod – iPod
! USB – USB portable audio player/USB
memory
! TEL – Bluetooth telephone
! BT-Audio – Bluetooth audio player
! S-DVD – DVD player/multi-DVD player
! MCD – Multi-CD player
! AUX 1 – AUX 1
! AUX 2 – AUX 2
! AV – AV input
! TV – Television
! EXT 1 – External unit 1
! EXT 2 – External unit 2
! REARVIEW – Rear view camera
! OFF – Turn the unit off
# When the source icon is not displayed, you
can display it by touching the screen.
# While operating the menu, you cannot select
a source by touching the source icon.
# To close source select menu, touch ESC.
% When using the button, press SRC re-
peatedly to select a desired source.
Notes
! In the following cases, the sound source will
not change.
— When no unit corresponding to the se-
lected source is connected.
— When there is no disc or magazine in the
player.
— When AUX (auxiliary input) is set to off
(refer to page 42).
— When the AV (AV input) is not set to
VIDEO (refer to page 46).
! AUX1 is set to VIDEO by default. Set the AUX1
to OFF when not in use (refer to Switching the
auxiliary setting on page 42).
! REARVIEW (rear view camera) cannot be se-
lected by pressing SRC.
! Image from rear view camera can be dis-
played automatically when the appropriate
setting is conducted. For details, refer to Set-
ting for rear view camera (back up camera) on
page 47.
! External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
! When this unit’s blue/white lead is connected
to the vehicle
’s auto-antenna relay control
terminal, the vehicle
’s antenna extends when
this unit
’s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
% Use VOLUME/MUTE to adjust the
sound level.
Rotate
VOLUME/MUTE to increase or de-
crease the volume.
Operating this unit
En
17
Section
03
Operating
this
unit