Panasonic KX-TG6700AL - Manual (Page 21)

Making/Answering Calls
21
Using the base unit
1
{
SP-PHONE}
L
An available line is automatically
selected and LINE1 or LINE2
indicator lights.
2
Dial the phone number.
3
When the other party answers, speak
into the MIC.
L Speak alternately with the other party.
4
When you finish talking, press {SP-
PHONE}.
Note:
L
You can also select a line by pressing
{
LINE1} or {LINE2} in step 1.
L Use the speakerphone in a quiet
environment.
L
While on a call, you can switch from the
base unit to the handset:
– Press {LINE1} or {LINE2} on the
handset, then press {SP-PHONE} on
the base unit.
– If the handset is on the base unit,
simply lift it.
L To change the line selection, see page
19.
Adjusting the speaker volume
Press {^} or {V} repeatedly while talking.
Redialling the last number dialled
{
SP-PHONE} i {REDIAL}
Understanding the indicators
The LINE1 and LINE2 indicators show the
status of each line as follows.
Status Meaning
Light off The line is free.
Light on The line is in use.
Flashing
rapidly A call is being received.
Flashing A call is put on hold or the
answering system is
answering a call.
TG6700AL.book Page 21 Tuesday, June 27, 2006 2:08 PM