Panasonic KX-TG6700AL - Manual (Page 10)

Preparation
10
Setting up the base unit
Overview
1
Connect the AC adaptor.
2
Connect the telephone line cord.
Refer to one of the following methods depending on your situation.
L
To connect to 2 single-line telephone sockets: page 11
L
To connect to a single-line telephone socket: page 11
For ADSL service subscribers: page 12
Connecting the AC adaptor
Connect the AC adaptor, then raise the antennas.
L Use only the included Panasonic AC adaptor PQLV207AL.
Note:
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L
The unit will not work during a power failure. We recommend connecting a corded
telephone to the same telephone line or to the same telephone jack using a telephone
double adaptor.
L
The unit is not designed to be used with rotary (pulse dialling) services.
(230–240 V AC,
50/60 Hz)
Hook
TG6700AL.book Page 10 Tuesday, June 27, 2006 2:08 PM