Playback, Still picture, Continuous playback – Philips 14PV184/05 User Manual

Page 7: Tape position/index search, Eliminating picture interference

Insert a cassette into the cassette slot.

Press the

GPLAY

playback button.

Picture search: Now press the

(rewind) or

(wind) button once or several times.

Interrupt: Press the

STOP h

button.

Wind: Stop the tape and press the

(rewind) or the

(wind) button.

Eject: Press the

button on the set.

Note: Some functions switch off automatically after a
while (e.g.: Pause, Still Picture, Scanning). This helps to
protect the cassette and prevent unnecessary power
consumption.
* With this set you can play back cassettes that have
been recorded on another TV Combi in the NTSC
standard.
* If you load a cassette with erase protection, the TV
Combi starts playback automatically.
* The picture quality is affected during scanning. The
sound is switched off.
* Remove the cassette before transporting the TV
Combi.

Still picture

Press the

STILL R

button. You see a still picture.

Interference stripes will appear.
Each time you press the

STILL R

button again the pic-

ture will move on one step.

Continuous playback

Press the

button.

Select and confirm the ’SPECIAL’ line.

Select the ’REPEAT PLAY’ line. Switch on the continuous
playback.

Press the

button.

Start the continuous playback with the

GPLAY

playback

button.

If you want to cancel the function, stop the continous
playback in the ’REPEAT PLAY’ line.

Tape position/Index search

Tape position: If you press the

button the tape position

will be shown in the display during Wind, Rewind, Record,
Playback and Pause/Stop.

Index search: Every time you start to record, the tape is
marked with a code mark.

Press the

INDEX E

button. Press the

button to

select the next code mark or the

button for the

previous code mark.

Once the TV Combi finds the code mark or unrecorded
area it will automatically switch to playback.

Note: When you press any tape transport button (e.g.:
the

button) this search function will be

stopped.
* You cannot use this function with recordings made on
another video recorder that does not have this function.

Eliminating picture interference

During playback press the

button.

Select and confirm the ’SPECIAL’ line.

Select the ’TRACKING’ line.

Press the

button until the playback

quality is at its best.

Press the

button. This setting will remain until

you remove the cassette.

Cleaning function: Press the

button.

Select and confirm the ’SPECIAL’ line.

Select the ’CLEANING’ line.

Press the

button. A blue screen appears for a few

seconds.

Wait until the blue screen disappears and press the

button.

Note:
* Some hired cassettes may have a poor picture/sound
quality. This is not a fault in your set.

PLAYBACK