Philips 14PV184/05 - Manual (Page 10)

8
How to read TELETEXT
• Press the TELETEXT e button to switch the TXT decoder
on and off. The TV-VIDEO Combi is now receiving the TXT
of the TV channel currently selected.
• To store the current page, press the OK button.
• If you want to select an other page, type in the number
with the digit buttons 0-9 .
Extra TELETEXT functions
• If you want to superimpose the clock time, press the
CLOCK . button.
• If you want to go to TELETEXT page 100, press the
INFO , button.
• If you want TELETEXT to be shown transparently, press
the TRANSP. - button.
To use the extra TELETEXT functions, press the MENU but-
ton, when you are in TELETEXT.
• To enlarge the print, select the symbol ’
e; ’ and confirm
with the OK button.
• To switch off the TELETEXT decoder temporarily, select
the symbol ’ eX ’ and confirm with the OK button.
• To call up a sub-page:
1 Select the symbol ’ /00 ’ and confirm with the OK but-
ton.
2 Enter the page number of the sub-page.
• To call up concealed information, select the symbol ’
e?
’ and confirm with the OK button.
• To stop the pages from being turned over, select the
symbol ’ STOP ’ and confirm with the OK button.
On Screen Display (OSD)
You can switch OSD on or off.
1 Press the MENU button.
2 Select and confirm the ’FEATURES’ line.
FEATURES v w
PP RECALL
ON TIMER
SLEEPTIMER
0
DISPLAY FULL
CHILD LOCK OFF
SET CLOCK
3 Select the ’DISPLAY’ line.
4 Select one of the options indicated.
’FULL’: OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’OFF’: OSD is switched off.
’PROG’: only the programm number appears.
’COUNT’: only the counter appears.
5 Confirm it with the MENU button.
Note: With the OK button you can superimpose the
actual operating mode on the TV screen.
Personal Preset
You can make your personal picture and volume settings
here. You can call up this setting and it will be used
automatically when you switch the set on.
1 Select your personal setting. (see chapter ’The TV set
functions’). Press the menu buttons
D and C
button simultaneously.
2 Select and confirm the ’PP STORE’ line.
3 To end, press the MENU button. The personal setting
has been stored.
4 Calling up your Preset: Press the MENU button.
5 Select and confirm the ’FEATURES’ line.
6 Select and confirm the ’PP RECALL’ line.
7 Press the MENU button. The set will use this setting.
Sleep function (switch off)
You can programme your set to switch off after a predeter-
mined period.
1 Press the MENU button.
2 Select and confirm the ’FEATURES’ line.
4. SPECIAL FEATURES