Planet Technology SGSW-2840 - Manual (Page 8)

The previous command would apply the follow settings for the switch.
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Figure 5-2 Set IP address screen
5. Repeat step 1 to check if the IP address is changed.
If the IP is successfully configured, the Switch will apply the new IP address setting
immediately. You can access the Web interface of SGSD / SGSW Managed Switch
through the new IP address.
Note
If you do not familiar with console command or the related param-
eter, enter “help” anytime in console to get the help description.