Philips MAGNAVOX MAT960 - Manual (Page 14)

Back of Internet Unit
RFU Adapter
RF Coaxial Cable
Phone
Cable
TV
AC
Power
Cord
3CH 4CH CHANNEL
75V
ANT /
CABLE
Connecting to a TV without Audio/Video jacks
If your TV does not have Audio/Video jacks, you must
use an RFU adapter (not supplied) to connect the
Internet Terminal to your TV.
Set the channel switch on the RFU adapter to VHF
channel 3 or 4, whichever is not used or least used in
your area.
1
Connect the RFU adapter to the VIDEO and AUDIO
OUT jacks on the Internet Terminal.
2
Use a RF coaxial cable to connect the ANTENNA
OUT jack on the adapter to the ANTENNA IN jack
on the back of your TV.
You may need to disconnect the antenna/cable from
your TV to make this connection. Connect the anten-
na/cable to the ANTENNA IN jack on the RFU
adapter.
3
14
Connections (cont’d)
Connect one end of the telephone cable to the
Internet Terminal’s TEL LINE jack. Connect the other
end to your home’s telephone outlet.
4
Connect one end of the AC power cord to the
Internet Terminal’s AC INPUT jack. Connect the other
end to an AC outlet.
5
Set your TV to channel 3 or 4, whichever channel the
adapter is set to, when using the Internet Terminal.
6
Connect your cable
or antenna to the
ANTENNA IN jack
on the RFU adapter.