Polaris Trail Boss 330 - Manual (Page 33)

30
FEATURES AND CONTROLS
Electrical Switches
WARNING
Activating the override switch while the throttle is open can cause
loss of control, resulting in severe injury or death. Do not activate
the override switch while the throttle is open.
Override Switch (1) (Reverse Speed Limiter) -
This vehicle is equipped with a reverse speed
limiter system. To gain additional power while
backing, depress the override switch.
Main Switch (2) - To start the engine, slide the
stop switch to the center RUN position and turn the
main key switch clockwise past the ON position. Release the key when
the engine starts.
NOTE: Turning off the main switch will shut off all electrical power to
the vehicle, including the lights.
WARNING
Leaving the keys in the ignition can lead to unauthorized use of
the vehicle resulting in serious injury or death. Always remove
the ignition key when the vehicle is not in use.
Engine Stop Switch (3) - The engine will not start or run when the
switch is in the OFF position. Its purpose is to provide the operator
with a quick means of engine shutdown in case of an emergency. To
stop the engine, slide the stop switch either right or left to the OFF
position.
NOTE: Turning off the engine stop switch will shut off all electrical
power to the vehicle, including the lights.
1
2
3
RUN OFF OFF
3