PYLE Audio PWLB006 - Manual

Universal VESA mount
Low profile: only from wall 17mm
Easy to install: sliding plate operation
Max load capacity:15Kg/33lbs
Flat Panel Fixed Mount
Step 4
Caution:
Step 5
Carefully position monitor so that Wall and
Monitor Plates are vertically aligned, with the
bottom of Monitor plate overlapping the top of
the Wall Plate by approximately 1”.
Gently lower monitor into position, sliding the
two plates together until the Monitor Plate
bottoms out. (Fig. 3)
Make sure that the plates are engaged
on both sides of the mount before releasing grip
on monitor.
Install two Safety Bolts (3) through bottom of Wall Plate.
(Fig. 3)
Step 4
Caution:
Step 5
1
Fig 3
2
3
IMPORTANT: If don’t understand about right install ways, please
consult to normal installing specialist .
IMPORTANT
-4-
Item No.:PWLB006 Item No.:PWLB006
INSTALLATION GUIDE
Caution :
This Product LCD /Plasma Wall Mount Bracket is
intended for use only with the maximum weights indicated .See apparatus
instructions .Use with products heavier than the maximum weights
indicated may result in instability causing possible injury .
Caution :
TV Size Rang 10 24 : "- "