beautypg.com

Finalizing, Finalizing cdr & cdrw discs, Unfinalizing cdrw discs – Philips CDR-775 User Manual

Page 22

background image

Finalizing CDR & CDRW discs

During finalizing, an index is written to the disc.

Finalizing is a simple procedure that is necessary in order
to:
- be able to play recordings on a CD PLAYER
- avoid further unwanted recordings on a disc,
- avoid erasure of tracks on a CDRW,
- write CD text on a CDR(W).

Note: When a CDR has been finalized, no more recordings can
be added.

Auto finalizing
The CDR(W) is automatically finalized when using the MAKE
CD recording function.

Manual finalizing

1

Make sure the disc (in the CD recorder) is absolutely free
of scratches and dust particles.

2

With the recorder stopped, press FINALIZE.
➜ The display will show

FINALIZE CD and PRESS

RECORD.

3

Press RECORD.

XX XX FINAL and the approximate finalization time is
shown on the display.
The display counts down through the finalization.
Upon completion, the total number of tracks and the
total time recorded will appear on the display.
For CDR(W),

r

changes to

d

on display.

Finalizing will take at least 2- 4 minutes.

Note: During finalization, the CD recorder will not accept
operating commands.

Unfinalizing CDRW discs

For CDRW discs only

If you want to make more recordings (or erase tracks) on a
finalized disc, you must unfinalize it first.The index of the
disc content will be removed.

To unfinalize

1

With the CD recorder stopped, press REC TYPE or ERASE.

UNFINALIZE and PRESS ENTER will appear on the
display.

2

Press the EASY JOG/ENTER key.
➜ The disc will now be unfinalized and can be used again

to record.

Note: After unfinalizing the recorder enters:
-

RECORD FAST mode if the REC TYPE key was pressed

before unfinalizing
-

ERASE TRACK mode if the ERASE key was pressed before

unfinalizing

0

If no further recording or erasure is required,
press STOP 9.

Notes:

Unfinalizing will take approximately 1.5 minutes.
When unfinalizing a CDRW disc with text available, this text

will be transferred to the CD recorder memory. However,
if the text memory is full, the message
MEMORY FULL/FINALIZE CD will be displayed.Text must
be erased, stored for other discs, or another disc must be
finalized in order to create space in the memory.

Finalizing

22

English

xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 22

This manual is related to the following products: