beautypg.com

Features, Program mode – Philips AX1000 User Manual

Page 12

background image

FEATURES

13

You can store up to 15 tracks to play in a program.
A single track may be stored more than once in the
program.

1 While playback is stopped, select a track with

∞ or §.

2 Press PROGRAM to store the track.

y

PROGRAM

lights up; the track number

programmed and P with the total number of
stored tracks are displayed.

3 Select and store all desired tracks in this way.

4 Press

2; to start playback of your selected tracks.

y

PROGRAM

is shown and playback starts.

• You can review the program by pressing PROGRAM for more than 2 seconds.

y

The display shows all the stored tracks in sequence.

Notes: – If you press PROGRAM and there is no track selected,

SELECt is displayed.

– If you try to store more than 15 tracks, FULL is displayed.

Clearing the program
• While playback is stopped, press

9 to clear program.

y

CLEAr is displayed once,

PROGRAM

goes off,

and the program is cleared.

Note: The program will also be cleared if the power supply is interrupted, or if the

CD-player lid is opened, or if the set switches off automatically.

MODE

PROGRAM

Programming track numbers

English

FEATURES

12

Selecting a track during playback
• Briefly press

∞ or § once or several times to skip to

the current, previous or next track.

y

Playback continues with the selected track, and
the track’s number is displayed.

Selecting a track when playback is stopped
1
Briefly press

∞ or § once or several times to select

the desired track. The track number is displayed.

2 Press

2; to start CD play.

y

Playback starts with the selected track.

Searching for a passage during playback
1
Keep

∞ or § pressed to find a particular passage in

a backward or forward direction.

y

Searching starts while playback continues at low
volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

y

Playback continues from this position.

Notes: – In SHUFFLE, SHUFFLE REPEAT ALL or REPEAT mode (see MODE chapter), or

while playing a program, searching is only possible within the particular
track.

PROGRAM

MODE

Selecting a track and searching

English

Ultra Basic /01 eng 1/6/01 16:54 Page 12

This manual is related to the following products: