Cd play, Program mode, 0mode – Philips AX1000 User Manual
Page 10
CD PLAY
11
• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly,
nF dISC is displayed, indicating that the CD has not been finalized. In that
case, use FINALIZE on your CD recorder to complete the recording.
• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds
after pressing
2; for sound reproduction to start.
• Playback will stop if you open the CD lid.
• While the CD is read, 1 -:- is displayed.
Volume adjustment
• Adjust the volume by using VOL
E.
Bass adjustment
• Press BASS to switch the bass enhancement on or
off
y
is shown if the bass enhancement is
activated.
PROGRAM
MODE
Volume and bass
Playback information
English
CD PLAY
10
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
1 Push the OPEN
2 slider to open the CD lid.
2 Insert an audio CD, printed side up, by pressing the
CD onto the hub.
3 Close the player by pressing the lid down.
4 Press
2; to switch the player on and start playback.
y
The current track number and elapsed playing
time are displayed.
• You can pause playback by pressing
2;.
y
The time at which playback was paused starts
flashing.
• You can continue playback by pressing
2; again.
5 Press
9 to stop playback.
y
The total number of tracks and the total playing
time of the CD are displayed.
6 Press
9 again to switch the player off.
• To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
0
MODE
Playing a CD
English
Ultra Basic /01 eng 1/6/01 16:54 Page 10