Point-to-multipoint, Quick installation – Proxima ASA 7911 User Manual

Page 11

Text mode
Original mode

2. Quick Installation

You may follow the quick installation and configuration steps if
all of the following conditions are true:

❑ You will use all of the software default values.

❑ You are using two (2) RangeLAN2 Serial Adapters as a

replacement for an RS-232 cable.

❑ You are using no more than nine (9) pairs of Serial

Adapters in one location.

Follow the steps below to install two RangeLAN2 791x Serial
Adapters:

1. Firmly screw the antenna onto its connector in a clock-

wise rotation. The antenna connector is located on the
side of the unit as shown in Figure 2.

Note:

Government regulatory agencies mandate that the an-
tenna not be alterable. Therefore, the RangeLAN2
Serial Adapter uses a custom antenna connector. Do
not attempt to use a non-certified Proxim antenna or
you may damage the connector and the Serial Adapter.

This manual is related to the following products:

7910