Philips SCD600 - Manual (Page 14)

, The lullaby starts to play on the baby unit and repeats continuously.
2 To stop the lullaby, press the play/stop button on the parent unit again.
3 To select another lullaby when a lullaby is playing:
- Press the ‘next lullaby’ button on the parent unit. (Fig. 31)
- If you want a different lullaby, press the ‘next lullaby’ button on the parent unit again.
out-of-range alert
When the parent unit is out of range of the baby unit, the parent unit beeps once and the message
‘Out of range’ appears on the video display. The LINK light on the parent unit flashes red.
Note: The message ‘Out of range’ also appears on the video display of the parent unit when the baby unit
is switched off.
night vision
The camera has infrared lights that allow you to see your baby clearly, even in a dark room. When
the lens detects low light levels, the infrared lights are activated automatically. Place the baby unit 1
to 1.5 metres/3 to 5 feet away from the baby to ensure a clear view.
Belt clip/stand
If the rechargeable battery of the parent unit is sufficiently charged, you can take the unit with you
inside and outside the house by attaching the unit to your belt or waistband with the belt clip. This
allows you to monitor your baby while you are moving around.
Cleaning and maintenance
Do not immerse the parent unit and the baby unit in water and do not clean them under the tap.
Do not use cleaning spray or liquid cleaners.
1 Switch off the baby unit and the parent unit and unplug them from the power outlet.
2 Clean the parent unit and the baby unit with a damp cloth.
Note: Fingerprints or dirt on the lens of the baby unit may affect the camera’s performance. Avoid
touching the lens with your fingers.
Make sure the baby unit and parent unit are dry before you connect them to the power outlet
again.
3 Clean the adapters with a dry cloth.
Storage
- When you are not going to use the baby monitor for some time, remove the non-rechargeable
batteries from the baby unit and the rechargeable battery from the parent unit. Store the parent
unit, the baby unit and the adapters in a cool and dry place.
- Do not wrap cords around the monitors when storing. Store cords in a safe location where
they will not be cut or damaged.
replacement
Baby unit
Batteries
Only replace the non-rechargeable batteries of the baby unit with four 1.5V R6 AAA batteries.
Note: We recommend you to use Philips non-rechargeable batteries or an equivalent type.
EngliSh 14