Philips AZ1080 - Manual (Page 12)

11
English
4 Close the cassette door.
5 Press RECORD 0 to start recording.
• Playing of the CD starts automatically. It is
not necessary to start the CD player
separately.
6 For brief interruptions press PAUSE
;.To
resume recording, press PAUSE ; again.
7 To stop recording, press STOP•OPEN
9/.
➜ The CD player goes to pause mode.
Press PLAY•PAUSE
2; to resume CD
playback, or press STOP
9 to stop CD
play.
Selecting and recording a particular
passage
• During CD playback, press and hold down
the SEARCH buttons
∞ or § on the set
to find your passage.
• Press PLAY•PAUSE
2; to put the CD
player on pause at the selected passage.
➜ Recording will begin from this exact
point in the track when you press
RECORD
0.
Note: If you press RECORD
0 during
playback, recording starts automatically from
the beginning of the current track.
Recording from the Radio
1 Adjust the source selector to MW or FM to
select your desired waveband.
2 Tune to the desired radio station (see
Radio reception).
3 Press STOP•OPEN 9/ to open the
cassette door. Insert a blank tape.
4 Close the cassette door.
5 Press RECORD 0 to start recording.
6 For brief interruptions, press PAUSE
;.To
resume recording, press PAUSE ; again.
7 To stop recording,
press STOP•OPEN 9/ .
Environmental information
All unnecessary packaging material has
been omitted.The packaging can be
easily separated into three materials:
cardboard, polystyrene and plastic.
Your set consists of materials which can
be recycled if disassembled by a
specialized company. Please observe the
local regulations regarding the disposal
of packing materials, exhausted
batteries and old equipment.
Recording
AZ1080/00A 03/13/02 10:06 Page 11