Perle Systems Speed LE 1P - Manual (Page 20)

Page 20
Chapter 2 Installing Drivers and Host Cards
6. During the installation, you may get a Windows Logo message. Click Continue Anyway
when these appear.
Your SPEED LE or SPEED LE Express driver installation is now finished.
Adding Additional Cards and/or Updating Drivers
Whenever you add any additional SPEED LE or SPEED LE Express hardware to your
system, Windows might install the latest digitally signed driver in its database (depending on
your Windows operating system and settings). To ensure you have the latest driver installed
after you add new hardware, you can either:
• Click Start > All Programs > Perle > Perle-Serial > Update Driver
or
• Reinstall the drivers as described in Installing Device Drivers and Utilities onto Your
System on page 18 .
Note
If you are installing an unsigned driver, you may have to click through the Found New
Hardware wizard for every SPEED LE or SPEED LE Express port on your system.