Philips SDV2720/27 - Manual (Page 4)

4
3.2 Connect to your TV
1
Connect one end of the coaxial cable to
signal output of the antenna and the other
end to the input on your TV receiver.
1
4 Using your indoor
television antenna
4.1 For VHF/FM reception
1
Extend the telescoping dipoles to the
longest possible length.
2
2
Turn your TV or FM radio to the desired
channel/station. Adjust the dipoles by
moving in different directions up and down,
until reception is achieved.
3
3
Rotate the 12 position fine tuning control
until the best reception is achieved.
4.2 For UHF reception
1
Turn your TV to the desired channel.
2
Position the UHF reflector until you obtain
the best reception by rotating it side to side
and up and down.
4
3
Rotate the 12 position fine tuning control
until the best reception is achieved.
D Note
For best results you should point your antenna
in the direction of the signal source.
3
4
ANT.
TV
1
2
SDV2720_27_EN.indd 4 5/5/08 4:19:42 PM