Panasonic EB-GD93 - Manual (Page 31)

Short Text Messages
You can receive, display, edit and/or send short text messages, of up to 160
characters to mobile phones on the same network or any network that has a roaming
agreement.
Setting the Phone for Text Messages
Before you can send a message you must enter the Message Centre number into
Parameters (your Service Provider will supply the Message Centre number).
The Message Centre number may have been preprogrammed, on your SIM card.
Setting the Message Centre Number
1 From Idle mode press
B 3163 to enter the Message Centre
menu.
2 Enter message centre number in international dial format – see “International
Dialling” page 6
Sending a Text Message
1 From Idle mode press
B 313 to enter the
Create menu and press
B
2 Enter the message (up to 160 characters) – see “Text
Entry” page 48 and press
B
You will be prompted if you wish to send the message, if you
do not wish to send the message press
C, the message will be stored.
3 Press
B and enter the destination phone number (or recall a number from the
Phonebook) - see “Retrieve a Number” page 11 and press
B
4 Press
B
5 You may be asked if you wish to have delivery confirmation, if you do not want
confirmation press
B. If you do, use f until
Yes is displayed in the option
area, then press
B
The default setting for delivery confirmation can be enabled/disabled using the
Report parameter in the Short Message menu.
6 Use
e to select a melody type, if required, and press B
27
Short Text Messages