Panasonic DMC-FX30 - Manual (Page 88)

Connecting to other equipment
88
VQT1C08
• If you want to print the age in [BABY1]/
[BABY2] (P44) or [PET] (P45) in scene
mode or the number of days that have
been passed since the departure date in
[TRAVEL DATE] (P51), use the software
[LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied) and print from the
PC. For information about this, refer to the
separate operating instructions for PC
connection.
• To find out more about PictBridge
compliant printers, contact your local
dealer.
∫ Selecting a single picture and printing
it
1 Press 2/1 to select the picture
and then press [MENU/SET].
• The message disappears in about
2 seconds.
2 Press 3 to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing
halfway.
3 Disconnect the USB connection
cable after printing.
∫ Selecting multiple pictures and
printing them
1 Press 3.
2 Press 3/4 to select an item and
then press [MENU/SET].
¢This only appears when [FAVORITE]
(P72) is set to [ON]. (However if none
of the pictures have [
] displayed, you
cannot select it even if [FAVORITE] is
set to [ON].)
PLEASE SELECT
THE PICTURE TO PRINT
PictBridge
1 / 3
PRINT
SELECT
MULTI PRINT
MENU /SET
MENU
OFF
SINGLE SELECT
NUM. OF PRINTS 1
PRINT WITH DATE
PAPER SIZE
PAGE LAYOUT
SELECT CANCEL SET MENU
PRINT START
/SET
MENU
OFF
[MULTI SELECT] Multiple pictures are
printed at one time.
• After selecting
[MULTI SELECT],
press
2/1 to select
the pictures to print
and then press
4.
The icon [ ]
appears on the
pictures to be printed.
(Press
4 again to
cancel the setting.)
Press [MENU/SET]
after finishing the
setting.
[SELECT ALL] Prints all the stored
pictures.
[DPOF PICTURE] Prints the pictures set
in [DPOF] only. (P76)
[FAVORITE]
¢
Prints the pictures set
as favorfavourites only.
(P72)
OFF
PictBridge
DPOF PICTURE
SELECT ALL
FAVORITE
SELECT CANCEL SET MENU
MULTI SELECT
/SET
MENU