Panasonic DMC-FX30 - Manual (Page 73)

Advanced (Playback)
73
VQT1C08
• You can set up to 999 pictures as
favourites.
∫ Deleting all favourites
1 Select [CANCEL] on the screen shown in
step 1 and then press [MENU/SET].
2 Press 3 to select [YES] and then press
[MENU/SET].
3 Press [MENU/SET] to close the menu.
• When printing pictures at a photo printing
store, [ALL DELETE EXCEPT ] (P28) is
useful so only the pictures you want to be
printed remain on the card.
• Use [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] on the
CD-ROM (supplied), to set, confirm or
delete favorites. (For information about
this, refer to the separate operating
instructions for PC connection.)
• You may not be able to set pictures taken
with other equipment as favourites.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P70)
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
∫ Rotate display
(The picture is automatically rotated
and displayed.)
1 Press 4 to select [ON] and then
press [MENU/SET].
• The pictures are displayed without
being rotated when you select [OFF].
• Refer to P27 for information about how
to play back pictures.
2 Press [MENU/SET] to close the
menu.
∫ Rotate
(The picture is rotated manually.)
1 Press 2 1 to select the picture
and then press 4.
• The [ROTATE] function is disabled
when [ROTATE DISP.] is set to [OFF].
• Motion pictures and protected pictures
cannot be rotated.
2 Press 3 4 to select the direction
to rotate the picture and then
press [MENU/SET].
3 Press [MENU/SET] twice to close
the menu.
• If you take pictures when aiming the
camera up or down, it may not be possible
to display the pictures vertically. (P22)
[ROTATE DISP.]/[ROTATE]
To display the picture rotated
/SET
MENU
PLAY 1 / 3
ON
OFF
SET MENU
OFF
ON
FAVORITE
ROTATE DISP.
ROTATE
SLIDE SHOW
SELECT /SET
MENU DATE STAMP
The picture rotates clockwise in
steps of 90°.
The picture rotates
counter-clockwise in steps of 90°.
ROTATE
SELECT SET
1 / 3
EXIT MENU
ROTATE
SELECT SET MENU CANCEL /SET
MENU