Patton electronic POTS/ISDN Splitter Shelf 6010 Series - Manual (Page 6)

6
3.0 INSTALLING THE SHELF
The Model 6010 shelf is supplied with mounting brackets and hardware
to allow installation in a 19 inch or 23 inch rack. By repositioning the
mounting brackets, the shelf can be installed with the connectors facing
the front or rear. With the connectors facing the front, a depth of 10
inches would be sufficient to mount the shelf with cables installed.
Note See Table 1 on page 5 for rack space requirements for each
6010 model.
Figure 1. 6010/1U
Figure 2. 6010/3U
The interconnecting cables shall be acceptable for external use and shall be rated for
the proper application with respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.
CAUTION