Troubleshooting – Philips SBC SC450 User Manual
Page 15

EN
15
Troubleshooting
Problem
Possible cause
Solution
Interference or poor
Mobile or cordless phone(s)
Move phone(s) away from
reception
too close to baby monitor.
baby monitor.
Interference from other
Switch all units to another
baby monitors in the
channel using the channel
neighborhood.
selection switch (A-9, B-8, C-8).
Battery power running low.
Recharge battery pack (C-14) of
small parent unit in time.
Replace batteries of large parent
unit and / or baby unit.
Transmitted signal is out of
Move parent units closer
range; e.g. there are too many
to baby unit.
walls and/or ceilings between
baby unit and parent units.
Parent units located too close
Move parent units away
to a window and picking up
from window.
interfering signals from other
appliances.
LINK lights (B-3, C-9)
Units are out of range.
Move units closer together.
flashing red / LINK
alarms beep.
Interference from another
Switch to a different channel
baby monitor.
(A-9, B-8, C-8).
Interference from another
Remove other FM source.
FM source.