Philips SBC SC450 - Manual (Page 14)

EN
14
Troubleshooting
Problem Possible cause Solution
No sound on parent units Volume off or too low. Turn VOLUME controls (B-9, C-10)
on parent units downwards.
Units out of range. Move parent units closer to
baby unit.
No connection Units are set to different Set channel selection switches
between units. channels. (A-9, B-8, C-8) to the same
position on all three units.
Parent units out of range of Move parent units closer
tansmitted signal. to baby unit.
Battery pack of Battery life at an end. Replace battery pack (C-14).
small parent unit
does not charge.
Features
Connecting / disconnecting the belt clip
(small parent unit)
You can carry the small parent in and around your house, giving
you freedom of movement while still monitoring your baby.
Connecting the belt clip
• Insert the little spindle on the rear of the belt clip into the
recess on the rear of the parent unit.
Turn the belt clip to the left until it clicks in position.
Disconnecting the belt clip
• Turn the belt clip to the right (TURN
2) and take it off.