Pioneer DVD-V7300D - Manual (Page 61)

61
En
Advanced Operations
DVD .
Direct setting using a
barcode reader
1. Read a barcode with a barcode reader.
2. Send it to the player.
Example 1) Read “PLAY” and send it.
Example 2) Read “Play Title 8 Chapters 5 to 12 with Subtitle
3, Audio 2 and Angle 1” and send it.
DVD .
Setting using the remote
control unit
Five commands including Play 3 , Pause 8 , e Still/Step E
and Stop
7
and WAIT and GO TO GROUP can be set using
the remote control unit.
The chapter search, chapter play, frame search and frame
segment play* commands can also be set using the remote
control unit.
* Frame segment play is to play between two specific frames.
Press
TITLE/CHP
FRM/TIME
.
÷ The TITLE number will blink and the input mode will be se-
lected.
Example 1) To set “Play”
Press
PLAY
.
÷ The Barcode/Command Stack Input screen
shows “PLAY” and increments to the next Input
screen.
Example 2) enter the wait time
1. Press and hold
PAUSE
.
÷ “WAIT 000 sec” appears on the screen.
2. Use the number buttons to enter
the wait time in seconds.
÷ The maximum time value that can be entered
is 999
3. Press
NEXT
.
(completes the procedures)
1
2
BC/COMMAND STACK GROUP 001: 001
PLAY
30 °
30 °
7 m
BC/COMMAND STACK GROUP 004: 006
WAIT 000sec.