Pioneer DVD-V7300D - Manual (Page 47)

47
En
Advanced Operations
DVD .
I
Video CD
. I
CD .
To access the ADV. SETUP menu
Press and hold
SETUP
for one second.
The screen displays the special menu shown in the figure on
the left (hereafter called the ADV.SETUP menu).
To set a parameter, for example, the weekly timer, select
WEEKLY TIMER with ,setting ON/OFF, etc. with
. If a parameter is set to ON, press
ENTER
and per-
form the setting instructions as prompted on the screen.
Likewise, for power-on start, select POWER ON START with
, setting ON/OFF, etc. with , If a param-
eter is set to ON, press
ENTER
, set ON/OFF to ON and perform
the setting instructions as prompted on the screen.
A similar procedure is used to set the other parameters with
and set ON/OFF, etc. with .
4 REPEAT MODE
Select OFF/CHAPTER/TITLE/DISC from the menu.
When TITLE PLAY MODE is set to ALL,DISC is be selected.
OFF:
The DVD player plays back in the normal status
and does not repeat.
CHAPTER:One selected chapter only is repeated (DVD).
One selected track only is repeated (Video CD, CD).
TITLE: Playing back repeats only one title (DVD).
Playing back repeats the entire disc (Video CD, CD).
DISC: Playing back repeats the entire disc (DVD only).
5 BAUD RATE
This sets the baud rate of the RS-232C interface. Two baud
rates of 4800 bps and 9600 bps can be selected.
6 TRAY LOCK
When set to ON, the opening and closing action of the disc
tray is locked.
7 BLACKBOARD LOCK
When set to ON, entering the video blackboard input mode is
prevented.
8 STACK MODE OSD
This controls ON/OFF switching of the OSD when executing
a stack.
ON: The STACK display appears on the screen when ex-
ecuting a stack and when searching.
OFF: The STACK display does not appear on the screen.
1 WEEKLY TIMER
The time for turning the power on and off can be set for each
day of the week; moreover, the title and chapter where play-
back is to start can also be set. The player is limited to a
maxiamm of 24 settings at one time. This function makes
unmanned operation possible.
OFF: The WEEKLY TIMER function does not operate.
ON:
The WEEKLY TIMER function operates.
2 POWER ON START
This function sets whether or not automatic playback is to start
when the power is switched on.
OFF: The POWER ON START function does not operate.
ON:
The POWER ON START function operates. It is also
necessary to set the playback title and chapter to iden-
tify the starting point for playback. If this starting point
is not identified, the player waits in the playback stop
status.
3 TITLE PLAY MODE
Single: When a single title has been selected in this mode,
the DVD player stops when this one title has been
played back.
All: When this mode has been selected, the player plays
back each title on a DVD disc in turn until all have
been played.
In order to set up the unique functions of the DVD-V7300D, there are settings for 15 parameters
that are made by the remote control unit.
ADV. SETUP MENU settings
ADV.SETUP page 1/2
WEEKLY TIMER OFF
POWER ON START OFF
TITLE PLAY MODE Single
REPEAT MODE OFF
BAUD RATE 4800bps
TRAY LOCK OFF
BLACKBOARD LOCK OFF
STACK MODE OSD ON
REV STEP/REV PLAY VOBU
Exit SETUP
ADV.SETUP page 2/2
PLAYER CONTRL PANEL Selectable
SETUP LOCK(MOUSE) ON
EXTERNAL OPTION SW Standard
SYNC OUT (DURING SQ) OFF
EXTERNAL SYNC OFF
AV SYNC COMPENSATE ON
Exit SETUP
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Above picture indicates the initial settings.