Patton electronic ENVIRONET EHA3201 - Manual (Page 5)

EHA3201 Quick Start Guide 5
Figure 3. EnviroNET G.SHDSL Router 10/100Base-T RJ-45 Connector Pinout
1.4 Connecting Power
The EHA3201 is an internally powered unit. The power connection is made via the 3-pin power connector on the
bottom panel of the EnviroNET G.SHDSL Router. A mating connector is provided to create the mating cable (see
figure 4 ). No configuration is necessary for the power supply.
Figure 4. Connecting the power cable
The EnviroNET G.SHDSL Router does not have a power switch, so it powers up as soon as it is plugged in.
There are no user-serviceable parts in the EnviroNET G.SHDSL
Router. Fuse replacement should only be performed by qualified
service personnel. Contact Patton Electronics Technical support at
(301) 975-1007 for more information.
1 TX+ (data output from the G.SHDSL router)
2 TX- (data output from the G.SHDSL router)
3 RX+ (data input to the G.SHDSL router)
4 (no connection)
5 (no connection)
6 RX- (data input to the G.SHDSL router)
7 (no connection)
8 (no connection)
1
2
3
4
5
6
7
8
EHA3201/R/ UI
L N
E
N L
E
EHA3201/R/ 24
L N
N L
L = +24
N = Ground
L = Line
N = Neutral
E = Earth
WARNING