5 listen to radio, Tune to a radio station, Program radio stations automatically – Philips DC320 User Manual
Page 18
18
5 Listen to radio
Note
Only FM radio reception is available on this unit.
•
Tune to a radio station
Tip
Position the antenna as far as possible from TV, VCR or other radiation source.
•
Note
For optimal reception, fully extend and adjust the position of the antenna.
•
1
Press
TUNER to select FM tuner.
2
Press and hold
/
on the remote control for more than 2
seconds.
[Srch] (search) is displayed.
»
The radio tunes to a station with strong reception automatically.
»
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press
•
/
repeatedly until you
find optimal reception.
Program radio stations automatically
You can program a maximum of 20 preset radio stations.
1
In the tuner mode, press and hold SET TIME/PROG for more than 2
seconds to activate automatic program mode.
[AUTO] (auto) is displayed.
»
All available stations are programmed in the order of waveband
»
reception strength.
The first programmed radio station is broadcast automatically.
»
EN