Philips DC320 - Manual (Page 17)

17
2
Press SOURCE repeatedly to select iPod/iPhone source.
The connected iPod/iPhone plays automatically.
»
To pause/resume play, press • .
To skip to a track, press • / .
To search during play, press and hold • / , then release to
resume normal play.
To go back to previous iPod/iPhone menu, press
• MENU. To
scroll through the menu, press PRESET +/-. To confirm a
selection, press OK/
.
If no key is pressed for more than 10 seconds,
»
OK/ acts
back as the play/pause key.
Charge the iPod/iPhone
When the unit is connected to power, the docked iPod/iPhone begins to
charge.
Tip
For certain iPod models, it may take up to a minute before the charging indication •
appears.
Play from an external device
You can also listen to an external audio device through this unit.
1
Press SOURCE repeatedly to select MP3 link source.
2
Connect the supplied MP3 link cable to:
the • MP3 LINK jack (3.5mm) on the back of the unit.
the headphone jack on an external device. •
3
Start to play the device (see the device user manual).
English
EN