Philips DC320 - Manual (Page 15)

15
3
Connect the other end of the AC adaptor to the wall outlet.
Set time and date
1
In standby mode, press and hold SET TIME/PROG for 2 seconds.
[12 HR] begins to blink.
»
2
Press / to select 12/24 hour format.
3
Press SET TIME/PROG to confirm.
The hour digits begin to blink.
»
4
Press / to set the hour.
5
Press SET TIME/PROG to confirm.
The minute digits begin to blink.
»
6
Repeat steps 4-5 to set the minute, year, month, and day.
Tip
In 12 hour format, [MONTH--DAY] is displayed. •
in 24 hour format, [DAY--MONTH] is displayed. •
English
EN