Peavey Special 212 - Manual (Page 6)

SPECIFICATIONS
Rated Power & Load:
Power specs measured with
T. Dynamics 100%
130 W RMS into 8 ohms
220 W RMS into 4 ohms
Power Clipping: (typically)
(5% THD, 1
120 V AC line)
130 W RMS into 8 ohms
220 W RMS into 4 ohms
Frequency Response:
+O, 3 60 Hz to 20
100 W RMS into 8 ohms
Hum Noise:
Greater than 86 below
rated power
Power Consumption:
Domestic: 600 W 60 Hz,
120 VAC
Export: 600 W Hz,
220-2301240 V AC
PREAMP SECTION
The following specs are measured
2 with the controls preset as follows:
Push Bright, Off (out)
Channel Select Normal (out)
Low& High IO
Mid 0
Resonance Presence 0
Pre Post Gain IO
Gain Thrash, Off (out)
Normal Levels are with normal
volume 5
Minimum Levels are with normal
volume IO
Shift, Off (out)
Bottom, Body, & Edge 0
T-Dynamics 100%
Preamp High Gain Input:
Impedance: High-Z, 1 M ohm
Nominal Input Level: -24
60 RMS
Minimum Input Level: -34
20 RMS
Maximum Input Level: 0
1 VRMS
Preamp Low Gain Input:
Impedance: High-Z, 44 k ohms
Nominal Input Level: -18
120 RMS
Minimum Input Level: -28
40 RMS
Maximum Input Level: 6
2 V R M S
Effects Send:
Load Impedance: 1 K ohm
or greater
Nominal Output Level: -10
0.3 V RMS or 0 1 V RMS
if Effects Level is in
Effects Return:
Impedance: High-Z, 18 K ohms
Designed Input Level: -10
0.3 V RMS or 0 1 V RMS
if Effects Level is in
(Switching jack provides Effects Send to
Effects Return connection when not used)
Preamp Output:
Load Impedance: 1 K ohm
or greater
Nominal Output Level: 0
1 VRMS
R.O.C. Invention Patent No. 072727
Power Amp Input:
Impedance: High-Z, 50 K ohms
Designed Input Level: 0
1 VRMS
(Switching jack provides preamp output to
power amp input connection when not
used)
System Hum & Noise
Nominal Input Level:
(20 Hz to 20 un weigh ted)
72 below rated power
Equalization:
Special Low, Mid, High
passive type EQ
Special Bottom, Body, &
Edge EQ
Push Bright: +6 2
Push Shift: Shifts Ultra Channel
Body Frequency
Push Thrash: -20 notch
1 in Lead channel
Push Gain: Increases Lead or
Ultra gain
Resonance: +6 cabinet
resonance
Presence: +6 5
External Footswitch Functions:
Lead/Ultra Select (when
Channel Select button is in)
Clean Bypass
Effects Loop Bypass
Dimensions Weight:
20.75” H x 26.625” W x 11.75” D
64.8 Ibs.
Due to our constant improvements,
and specifications ted herein are subject to charge without notice.
6