Polaris 700 - Manual (Page 85)

83
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Rear Gearcase Oil Check
With the ATV on a level surface, remove the fill plug and visually
inspect the lubricant level through the fill hole (1). Maintain the oil
level with the bottom of the fill plug hole.
Rear Gearcase Oil Change
1. Remove the drain plug (2). Catch
and discard used oil properly.
2. Clean and reinstall the drain plug
with a new sealing washer. Torque
to 14 ft. lbs. (19 Nm).
3. Remove the fill plug and add 5
ounces (150 ml) of Premium Front
Gearcase Fluid (or GL5 80-90 weight
gear lube).
4. Inspect the oil level, which should be
maintained level with the bottom of the fill plug hole.
5. Reinstall the fill plug. Torque to 14 ft. lbs. (19 Nm) and check for
leaks.
1
2