Peavey SP 115MX - Manual (Page 3)

Architectural & engineering
specifications
The loudspeaker system shall have an
operating bandwidth of 100 Hz - 14 kHz.
The nominal output level shall be 99.0 dB
when measured at a distance of one
meter with an input of one Watt. The
nominal impedance shall be 8.0 Ohms.
The maximum continuous power handling
shall be 500 Watts, maximum program
power of 1,000 Watts and a peak power
input of at least 2,000 Watts, with a
minimum amplifier headroom of 3 dB.
The nominal radiation geometry shall be
45 degrees in the horizontal plane and 90
degrees in the vertical plane. The outside
dimensions shall be 15.25 inches high by
24.50 inches wide by 16.00 inches deep.
The weight shall be 57 pounds. The
loudspeaker system shall be a Peavey
model SP 115MX. 3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
40
50
60
70
80
90
100
110
dB
SPL
(re
20
Pa)
Harmonic Distortion : 1% Rated Power
Figure 4
3rd Harmonic
2nd Harmonic
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
50
60
70
80
90
100
110
120
dB
SPL
(re
20
Pa)
Harmonic Distortion : 10% Rated Power
Figure 3
3rd Harmonic
2nd Harmonic