Polaroid Flash 640 SE - Manual (Page 10)

8 Questions? Contact Polaroid Corporation at www.polaroiddigitalEU.com
English
Using the flash
When you turn on your digital camera, it is in the No Flash (nF) mode. You can change the
flash setting at any time.
Note: If the batteries are very weak when you turn on the camera, the flash does not
charge.
The camera indicates when you may need to use the flash by displaying the Low Lighting message
(LL) in the LCD status display. There are three flash settings:
LCD icon Flash setting
nF No Flash (flash off)
• The flash does not fire.
• Use when shooting toward a reflective background, such as a
window or a mirror.
AF Autoflash
• The flash fires automatically when needed.
• The autoexposure sensor in the camera determines when the
flash is necessary.
FF Force Flash
The flash fires for every photo.
640SEcdqs.book Page 8 Tuesday, December 5, 2000 4:46 PM