Petsafe PIF-275-19 - Manual (Page 19)

www.petsafe.net 19
The Receiver
Collar is beeping
everywhere.
• Check that the Transmitter is plugged
into a working standard 120-volt outlet,
turned on, the Power Light is on, and the
Transmitter controls are set at your desired
settings.
• Bring Receiver Collar while standing within
5-10 feet of the Transmitter to reset.
• Re-Synchronize the System. (Page 22)
The Receiver
Collar is beeping
but my pet is not
responding to the
Static Correction.
• Make sure the Static Correction Level is set
at 2 or above.
• Test the Receiver Collar with the Test Light.
• If the Test Light flashes, check the fit of the
Receiver Collar.
• Trim your pet’s fur where the Contact
Points touch the neck and/or purchase long
Contact Points by contacting the Customer
Care Center at 1-800-732-2677.
• Increase the Static Correction Level.
• Repeat training steps to reinforce training.