Petsafe PIF-275-19 - Manual (Page 10)

10 1-800-732-2677
To Insert and Remove the
Receiver Collar Battery
Note: Do not install the battery while the
Receiver Collar is on your pet.
This Receiver Collar utilizes a replaceable
PetSafe ® battery (RFA-67). This unique battery
is designed to make battery replacement
easier and increase water protection.
To insert the battery, align the symbols on the
battery (arrow) and Receiver Collar (triangle)
(B). Use the edge of the Test Light Tool (B) to
turn the battery clockwise until the arrow lines
up with the lock symbol on the housing.
B
C
To remove the battery, turn the battery counter-clockwise using the
edge of the Test Light Tool (C). DO NOT attempt to cut into or pry open
the battery. Be sure to discard the used battery properly.
A replacement PetSafe
®
battery (RFA-67) can be found at many retailers.
Contact the Customer Care Center at 1-800-732-2677 or visit our web
site at www.petsafe.net to locate a retailer near you.