8 troubleshooting problems – Polaroid PDC 1050 User Manual

Page 31

Polaroid PDC 1050 Digital Camera User Guide

www.polaroid-digital.com

Polaroid PDC 1050 Digital Camera User Guide

www.polaroid-digital.com

8 Troubleshooting Problems

The troubleshooting guide is designed to help you. If problems continue,

please contact your local customer support hot-line. See your registration

card for help line contact details.

receive

error

message when I am

installing the PDC 1050

Camera Driver.

PDC 1050 Camera Driver

does not load.

Shut down all other applications

and attempt to reinstall the

driver

Symptom

Problem

Solution

I cannot upload images

to the PC.

Connection failure.

Check all cables connections are

secured.

I cannot run the PDC

1050 Camera Driver.

Conflict with another camera

driver or capture device.

If you have another camera

installed on your computer,

remove it and it’s driver

completely from your system to

avoid conflict with them.

I cannot upload the

images from the internal

memory of the PDC

1050 camera to PC.

The CF™Card is inserted

inside the CF™Card slot.

The memory card with a

higher priority than the internal

memory for image storage or

image transfer or delete.

I cannot switch on my

PDC 1050 Camera after

inserting a CF™Card .

The CF™Card is inserted all

the way in or card slot door is

not closed properly.

Make sure the CF™Card is

inserted all the way in and close

the slot door properly.

I press the shutter button

and get no response.

The PDC 1050 Camera is

processing the image.

The internal memory or

CF™Card memory is full.

Wait for this process to complete

and then take your next image.

Delete some images in the

internal memory of the camera

or CF™Card

Check the USB controller in

your BIOS if they are activated.

If these does not work contact

your national Customer Support

representative.

I get a blurred image

when

uploading

images to my computer.

There may be a momentary

delay between pressing the

shutter button and the actual

exposure.

Hold your PDC 1050 camera

steadily until you hear “ two

beeps” which indicates the

exposure is completed.