The room – Pioneer PDP-6100HD User Manual

Page 24

English

OSD (On Screen Display) Controls

Adjusting the colors

Use this procedure to adjust hue and color density for red,
green, blue, yellow, magenta and cyan.
You can accentuate the green color of trees, the blue of
the sky, etc.

Example: Adjusting the color management for blue

On “PICTURE” menu, select “COLOR MGT”, then press
the MENU/SET button.
The “COLOR MGT” screen appears.
On “BLUE” of “COLOR MGT”, adjust the color
management.

SEL.

ADJ.

EXIT RETURN

C O L O R M G T

R E D
G R E E N
B L U E
Y E L L O W
M A G E N TA
C YA N
R E S E T

: O F F

Information
Ⅵ

COLOR MGT settings

RED:

Makes red’s adjustment

GREEN:

Makes green’s adjustment

BLUE:

Makes blue’s adjustment

YELLOW:

Makes yellow’s adjustment

MAGENTA:

Makes magenta’s adjustment

CYAN:

Makes cyan’s adjustment

RESET:

Resets settings to the factory default value.

Use

ᮤ

and

ᮣ

buttons to select “ON”, then press the

MENU/SET button.

Adjusting the pedestal level (black level)

This feature adjusts the video black level in a video image.

Example: Setting “3.75”

On “SET UP LEVEL” of “PICTURE” menu, select “3.75”.

EXIT RETURN

SEL.

ADJ.

P I C T U R E

P I C T U R E M E M O RY
C O N T R A S T
B R I G H T N E S S
S H A R P N E S S
C O L O R
T I N T
D N R
C O L O R T E M P.
G A M M A
L O W TO N E
S E T U P L E V E L
C O L O R M G T
P U R E C I N E M A
AV S E L E C T I O N

: O F F

: L O W
: M I D D L E
: 2 . 1
: A U TO
: 3 . 7 5

: O N
: D Y N A M I C

Information
Ⅵ

SET UP LEVEL settings

Normal status

3.75:

3.75% lower than normal

7.5:

7.5% lower than normal

Setting the picture to suit the movie

The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 1035I
(60Hz), 1080I (60Hz) only]

Example: Setting the “PURECINEMA” to “OFF”

On “PURECINEMA” of “PICTURE” menu, select “OFF”.

EXIT RETURN

SEL.

ADJ.

P I C T U R E

: O F F

: L O W
: M I D D L E
: 2 . 1
: A U TO
: 0

: O F F
: D Y N A M I C

Information
Ⅵ

PURECINEMA

ON:

Automatic discrimination of the image and

projection in PURECINEMA.

OFF:

PURECINEMA does not function.

Setting the picture modes according to the
brightness of the room

There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.

Example: Setting the “MOVIE1” mode

On “AV SELECTION” of “PICTURE” menu, select
“MOVIE1”.

EXIT RETURN

SEL.

ADJ.

P I C T U R E

: O F F

: L O W
: M I D D L E
: 2 . 1
: A U TO
: 0

: O N
: D Y N A M I C

AV S E L E C T I O N

: M O V I E 1

Information
Ⅵ

Types of AV SELECTION

MOVIE1, 2:

Set this mode when watching video in a dark

room.
This mode provides darker, finer pictures, like the screen
in movie theaters.
For a darker image, select MOVIE2.

STANDARD:

Set this mode when watching video in a

bright room.
This mode provides pictures with distinct differences
between light and dark sections.

DYNAMIC:

This mode provides brighter pictures than

STANDARD.

DEFAULT:

Use this to reset the picture to the factory

default settings.