Panasonic TZ-DRD100 - Manual (Page 39)

38
R OLLER G UIDE M ENU O PERATIONS
Setup : Satellite Setup – Sat. Ports
After you have selected the Dish type, you can choose the satellite port configuration.
If Round dish is selected, then only the Satellite A configuration is available. If you
selected Oval shaped dish, you can choose from the three configurations: Auto
configuration, Sat. A and B, and Sat. A, B and C. If you select Auto configuration
operation, the navigation buttons are disabled until the Digital Satellite Receiver
completes the auto configuration.
Note: Please also refer to the installation manual for the satellite dish antenna for
proper mounting procedure.
Procedure
r Press u and q button to setup satellite ports configuration.
r Press pq buttons to navigate among the choices - Sat. A and B, Sat. A, B and C, and Auto
Configuration.
r Select Sat A & B and Auto Configuration, if you have Oval shaped dish.
r Press ACTION button to save the selection.
r Press t button to return to Sat. Setup menu.
Satellite Setup – Sat. Ports Screen
q Sat Setup
Sat Ports
Dish Pos
Sig Meter
Dish Type u
Oval
u
Auto Configuration
Sat A and B
Sat A, B and C
Press u to setup satellite ports.