Panasonic TZ-DRD100 - Manual (Page 18)

17
G ETTING S TARTED
Getting Started
Step 1. Connect AC Power Cord
Plug the AC power cord into a grounded outlet. Do not turn on any devices until you
have finished making all necessary connections.
Step 1a. DIRECTV Satellite dish Connection
Connect the DIRECTV Satellite dish downlead to the Satellite In jack on the rear panel
of the Digital Satellite Receiver.
Note: With this receiver and the proper satellite dish antenna, you may be able to subscribe
to local channels from DIRECTV in certain markets. Additional equipment may be
required in some areas. Check with your retailer or visit DIRECTV.com for information
on availability of local channels from DIRECTV in your area.
Step 1b. Antenna/Cable Connection
Connect the antenna or cable wire to the VHF/UHF IN jack on the rear panel of the
Digital Satellite Receiver. The signal from the terrestrial antenna or cable will be
passed through when the user presses the TV/SAT button on the remote control or
when the digital satellite receiver is off. The RF output of the Digital Satellite Receiver
must be connected to the television.
SATELLITE
IN
R-AUDIO-L VIDEO
NTSC OUTPUT VHF/UHF
IN
VHF (SAT) /UHF
OUT
TEL LINE AC IN
SATELLITE
DISH
SATELLITE
IN
R-AUDIO-L VIDEO
NTSC OUTPUT VHF/UHF
IN
VHF (SAT) /UHF
OUT
TEL LINE AC IN
CABLE OR OFF-AIR ANTENNA