Panasonic TZ-DRD100 - Manual (Page 35)

34
R OLLER G UIDE F EATURE C HART
Roller Guide Feature Chart
Roller Guide Feature Chart
M ENU D ESCRIPTION
SET UP
Satellite Setup
r Dish Type - Lets you choose Oval or
Round dish.
r Sat. Ports - Selects up to 4 nominal
satellite configuration or lets you perform
auto-detection. The user can select:
• Dish Type : Oval or Round
• Satellite A and B
• Satellite A, B, and C
• Auto Configuration
r Dish Position - Digital Satellite Receiver
displays the proper co-ordinates for the
particular zip code.
r Signal Meter - Shows the strength of the
selected satellite signal.
MONITOR
r TYPE
•
4:3 (default setting) for conventional
TV screen.
• 16:9 for wide screen.
System Test
r System Test - Invokes system test
available for Satellite Input.
Access Card
r Access card - Remapping of information.
(Use only when instructed by DIRECTV.)
TV Output
r TV Setup - Lets you set the RF output of
the Digital Satellite Receiver to Ch 3 or 4 so
that you can connect the output to the ANT
IN jack of your television.
GUIDE
Guide provides Channels and Program
information to the user.
Note: The Guide is active in the SAT mode
only.