Philips SPC520NC - Manual (Page 11)

The Philips SPC520NC/SPC525NC video properties can be
changed:
- from within an application;
- by clicking the VProperty icon
‘ ’ in the Windows taskbar,
bottom right of your screen;
- by selecting ‘PC Camera Settings’ under ‘Preferences’ in the
VLounge selection screen;
- by clicking the ‘ ’ icon in the VLounge selection screen.
General settings
1 Flickerless image
The Flickerless image option should only be used under
flickering light conditions (e.g. fluorescent or neon lamps) to
prevent flickering or strangely colored video images.
If this option is used under normal lighting conditions the
video image may be overexposed.
2 Region
If you are using the Philips SPC520NC/SPC525NC in Europe,
select '50 Hz' and if you are using the Philips
SPC520NC/SPC525NC in North America, select '60 Hz'. For
Asia this setting is dependent on the local mains output. E.g.
for China, select ‘50 Hz’ and for Taiwan, select ‘60 Hz’. For
Japan the setting is region dependent.
Please check your local mains output to find the correct
‘Region’ setting.
1
2
WebCam settings
EN
11