Philips SPC520NC - Manual (Page 10)

Connecting the WebCam to your PC /
laptop
1 Be sure to run the installation CD first, before connecting the
WebCam to the PC / laptop.
2 Turn on the PC / laptop.
3 Connect the USB connector of the USB cable to the USB port
of the PC / laptop.
> The WebCam will now derive its power from the PC / laptop.
4 Aim the webcam as required.
5 Push the USB cable into the cable management slot.
6 Use the clamp and the two rubber rims to attach the WebCam
to your PC monitor or laptop screen.
7 Connect the headset audio cable (SPC525NC only) to the sound
card of your PC / laptop.
• Connect the black headphone plug (n) to the headphone
socket of the PC sound card.
• Connect the grey microphone plug (!) to the microphone or
green socket of the sound card.
Installation
EN
10
AUDIO OU
T AUDIO I
N
AUDIO O
UT
AUDIO IN
3
3
6
6
7
7
5
5