beautypg.com

Playback programming – Philips CDC775BK User Manual

Page 10

background image

Activating The Fade-In And Fade-Out
Function (FADER)

NOTE!
– The FADER function can be used if the changer is

connected to the amplifier or the system via the
ANALOG OUT output.

• During play press FADER.
– The sound level will now gradually decrease (FADE

OUT), after which the changer will go into the PAUSE
mode.

FAdE f

FAdE ≠

FAdE _

• Press FADER again.
– Play continues and the sound level will increase again

to the originally set level (FADE IN).

FAdE _

FAdE ≠

FAdE f

Storing A Program (PROGRAM)

– By programming the changer you can play up to 40

tracks in any required sequence.

– FULL lights up if you exceed the maximum of 40

tracks.

– NO dISC lights up when there is no CD in the

selected CD compartment.

• In STOP mode, press PROGRAM to open the

memory.

– SELECt dISC lights up and

PROGRAM

starts

flashing.

• Press PROGRAM again to select the last selected

disc or press any CD DIRECT PLAY button or DISC
(on the remote control) to select the desired disc.

• Press

T or

S

(less than 0.5 seconds) until

the first track number you wish to program appears
under TRACK.

• Press PROGRAM again.

– The track number has now been stored in the

changers memory.

• Select the other track numbers required and store

each track by pressing PROGRAM.

– The number of tracks and the playing time of your

program will be shown under TRACK and TOT(al)
TIME.

• Press STOP

9 to quit the PROGRAM mode.

Note:

– If the total playing time is more than “99:59”, then

“--:--” appears in the display instead of the total
playing time.

Playing The Program ( PLAY

2)

• Press PLAY

2.

– Playback starts with the first number of the program.

The PROGRAM and EDIT buttons cannot be used during
programmed play.
Search for a particular passage is only possible within
the track being played.

Erasing A Program (STOP

9 or

OPEN/CLOSE)

In PLAY mode:
• Press OPEN/CLOSE or STOP

9 (twice).

In STOP mode:
• Press OPEN/CLOSE or STOP

9.

– The program has now been erased.

TRACK

TRACK

TIME

5

PROGRAM

18

English

PLAYBACK

PROGRAMMING

pg 09-21/CDC775/17-Eng 2/16/00 9:26 AM Page 18

This manual is related to the following products: