PYLE Audio PLTV7.5DIN - Manual (Page 16)

CONTROL
1. NAVIGATION AUDIO (※ In case, you use an optional compatible Navigation System)
When a navigation system is connected to this unit, you can use the navigation system
properly after you adjust the navigation audio control. If you press NAVI button on the
remote control, the navigation mode will be displayed on the screen on any mode, when you
connect the navigation system to this unit, you should connect it through RGB connector at
the backside of this unit
NOTE
This is limited to only the unit with RGB connector.
1. Press MENU button to select CONTROL menu, and press SEARCH ▲/▼ button to
select NAVI AUDIO.
2. Press VOLUME ◀ or ▶ button to change the navigation audio as follows.
OFF -> ON -> AUTO
OFF : When a navigation system is not connected, the NAVI AUDIO should be set to OFF.
ON : When a navigation system is connected to this unit through RGB connector, the NAVI
AUDIO should be set to ON or AUTO.
When the NAVI AUDIO is set to ON on the navigation mode, only the navigation
audio is heard through the speakers.
AUTO : When the NAVI AUDIO is set to AUTO on the navigation mode, the previous mode
audio (TV) is heard through the speakers, when the navigation audio comes on, the
previous mode audio is muted and the navigation audio is heard through the speakers.
16