PYLE Audio PLTV7.5DIN - Manual (Page 10)

3. CLOSING THE MONITOR
) r on the remote control. The monitor will be
is not closed, hold left and right upper side of the monitor and make the monitor
OTE
Press OPEN/CLOSE button on the unit o 1
closed.
2) If it
parallel with the unit as the picture. And press OPEN/CLOSE button to close the monitor.
N
1) If the monitor is not parallel to the front of the unit, the monitor will not be closed.
closed
4. ADJUSTING TILT POSITION
he tilt position can be adjusted in 5 steps by pressing TILT UP/DOWN buttons. Each time
OTE
2) If OPEN/CLOSE button is pressed while the unit is powered on, the monitor will be
but the power is still on. Press the POWER button to turn the power off.
T
you press TILT UP button, the monitor will swing one step backward and each time you
press TILT DOWN button, the monitor will swing one step forward.
N
The TILT position also can be adjusted by pressing VOL ◀ / ▶ buttons on the remote
control.
10